Carousel Template · Bootstrap

Expand your A/V receiver's audio distribution capabilities in the home theater and beyond with this powerful two-channel WRAT component, featuring auto power on and Three-Stage Inverted Darlington Circuitry.

Vector Linear (VL) Digital Technology

Up to now, pulse width modulation (PWM) has been used as an efficient method of amplifying audio signals. Theoretically, this method should result in accurate analog-to-digital conversion. In reality, "noise spikes" introduce errors into the inversion timing, making accurate conversion into pulse widths impossible. VL Digital works by charging and inverting analog input signals, and performing PWM proportional to the analog signal. The spike noise waveform is symmetrical, so the upper and lower portions of the waveform (their charge quantities) cancel each other out. This ensures accurate PWM at all times.

Perfect for Custom Installation

Integra products are designed and engineered to meet the demands of custom audio/video systems installers. The ADM-30.1 has input level adjustment, auto on function and 12V remote on/off switch with selectable turn on and audio sense 12V trigger modes. Optional rack mount kits for all models provide a clean, finished look when installed in racks and cabinets. Integra works closely with control systems partners such as Savant, Crestron, URC, and RTI, and supports Control4 Simple Device Discovery Protocol (SDDP) and AMX Device Discovery for simplified system integration. A complete list of Partners can be found here (provide link to Partners page). So when it's "Movie Time" everything operates seamlessly and intuitively. Now that's "Integra"tion!

# Channels 2
Power Output (1 kHz 0.8% THD (FTC)) 100W at 2 Ω
40W at 8 Ω
Continuous 6 Ω Rated
Continuous 4 Ω Rated
Continuous 2 Ω Rated
Amplifier Frequency Response 5 Hz-60 kHz (+1,-3 dB)
Discrete Output Stages for All Channels
Independent Power Supply 3
Reference Grade Capacitors Audio-tuned
VL Digital Technology
Thick Copper Bus Plates
Protection Modes DC
Gold-Plated RCA Audio Input
Gold-Plated Buffered RCA Output
Gold-Plated RCA Transparent Binding Post 5-way
12V Trigger In / Out - / ✓
Input Level Adjustment
Daisy Chain Support (Amplifier Stacking) Up to 15 (Buffered Inputs / Outputs)
Auto On Function
Audio Sense Level Control -6 dB - 0 dB)
Brushed Aluminum Front Panel
Hi-Rigidity, Anti-Resonant Chassis 1.6 mm Thick
Detachable AC Cord
Rack Mount Kit Available IRK-070-3A
Warranty 3 YEARS
1 kHz 0.8% THD (FTC)100 W 2 Ω x 2 ch
40 W 8 Ω x 2 ch
Dynamic Power2 x 115 W @ 3 Ω
2 x 90W @ 4 Ω
2 x 45 W @ 8 Ω
THD0.08 %
(1 kHz, 8 Ω, 1 W Output)
Damping Factor60 at 8 Ω
Frequency Response5 Hz to 60 kHz (+1, -3 dB)
Signal-to-Noise Ratio100 dB (LINE, IHF-A)
Speaker Impedance2 Ω–16 Ω
Power SupplyAC 120 V, 60 Hz
Power Consumption110 Watts
Dimensions (W X H X D)17 1/8" x 3 1/8" x 12 3/4"
435 × 80 × 324 mm
Weight21.2 lbs (9.6 kg)