Untitled Document



Products

 

 

 

       Receiver

       DTR-20.1

click for info on HDMI click for info on CinemaFILTER click for info on Audyssey 2EQ/Dynamic EQ/Dynamic Vol click for info on Dolby True-HD click for info on DTS-HD Master Audio click for info on WRAT
click for info on 192 kHz/24-Bit Audio DACs click for info on Theater-Dimensional click for info on RIHD (Remote Interactivity Over HDMI)

DTR-20.1
2 Zone, 5.2 Channel Surround Receiver

Amplifier Section
Power Output (8 Ω, 20 Hz-20 kHz, FTC)
Dynamic Power
210 W /Channel (3 Ω)
180 W /Channel (4 Ω)
110 W /Channel (8 Ω)
THD (Total Harmonic Distortion)
0.08% (Power Rated)
Damping Factor
60 (Front, 1 kHz, 8ohm)
Input Sensitivity and Impedance
200 mV/ 47 kohm (LINE)
Output Level and Impedance
200 mV/ 470 ohm (REC OUT)
Frequency Response
5 Hz–100 kHz/ +1 dB-3 dB (LINE)
Tone Control
±10 dB, 50 Hz (BASS)
±10 dB, 20 kHz (TREBLE)
Signal to Noise Ratio
106 dB (LINE, IHF-A)
Speaker Impedance
6 ohm–16 ohm

Video Section
Input Sensitivity/Output
Level and Impedance
1 Vp-p/75 Ohm (Component and S-Video Y)
0.7 Vp-p/75 ohm (Component Pb/Cb, Pr/Cr)
0.28 Vp-p/75 ohm (S-Video C)
1 Vp-p/75 ohm (Composite)
Component Video
Frequency Response
5Hz - 50MHz, -3 dB

Tuner Section

FM
Tuning Frequency Range
87.5 MHz– 107.9 MHz
Usable Sensitivity
Stereo: 22.2 dBf (75ohm IHF)
Signal to Noise Ratio
THD
Frequency Response
Stereo Separation

AM
Tuning Frequency Range
530 kHz–1710 kHz
Usable Sensitivity
300 uV/m
Signal to Noise Ratio
THD

General
Power Supply
AC 120 V, 60 Hz
Power Consumption
4.9 A
Standby Power Consumption
Dimensions (W X H X D)
17 1/8" x 6 7/8" x 12 7/8"
435 × 175 × 326.5 mm
Weight
23.1 ibs (10.5 kg)

 

Specifications and features subject to change without notice.

 Home | Dealers | Support | Warranty | Site Map         252 1