Products

DTR-4.6
5.1 Channel Two Zone XM-Ready Receiver

Amplifier Section

Power Output

2 channels driven		90 W + 90 W (8 ohm, 20 Hz–20 kHz, FTC)

Dynamic Power		225 W + 225 W (3 ohm, Front) 170 W + 170 W (4 ohm, Front) 105 W + 105 W (8 ohm, Front)

THD (Total Harmonic Distortion)		0.08% (Power Rated)

Damping Factor		60 (Front, 1 kHz, 8ohm)

Input Sensitivity and Impedance		200 mV/ 47 kohm (LINE)

Output Level and Impedance		200 mV/ 470 ohm (REC OUT)

Frequency Response		5 Hz–100 kHz/ +1 dB-3 dB (LINE)

Tone Control		±10 dB, 50 Hz (BASS) ±10 dB, 20 kHz (TREBLE)

Signal to Noise Ratio		100 dB (LINE, IHF-A)

Speaker Impedance		6ohm–

Video Section

Input Sensitivity/Output

Level and Impedance		1 Vp-p /75ohm (Component and S-Video Y) 0.7 Vp-p /75? (Component Pb/Cb,Pr/Cr) 0.28 Vp-p /75ohm (S-Video C) 1 Vp-p /75ohm (Composite)

Component Video

Frequency Response		5 Hz – 50 MHz

Tuner Section

FM

Tuning Frequency Range		87.5 MHz– 107.9 MHz

Usable Sensitivity		Stereo: 22.2 dBf (75ohm IHF) Mono: 15.2 dBf (75ohm IHF)

Signal to Noise Ratio		Stereo: 67 dB (IHF-A) Mono: 73 dB (IHF-A)

THD		Stereo: 0.5% (1 kHz) Mono:0.3% (1 kHz)

Frequency Response		30 Hz–15 kHz / ±1 dB

Stereo Separation		40 dB (1 kHz)

AM

Tuning Frequency Range		530 kHz–1710 kHz

Usable Sensitivity		300 uV/m

Signal to Noise Ratio		40 dB

THD		0.70%

General

Power Supply		AC 120 V, 60 Hz

Power Consumption		5.7 A

Standby Power Consumption		0.1 W

Dimensions (W X H X D)		17 1/8" x 6 13/16" x 16 7/8" 435 × 173.5 × 428.5 mm

Weight		25.8 lbs / 11.7 kg

Specifications and features subject to change without notice.