Products

DTR-6.9
THX Select2 Plus, 2 Zone, 7.1 Channel Surround Receiver

Amplifier Section

Rated Output Power (FTC)

All channels		100 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.08% 115 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.7% 125 watts minimum continuous power per channel, 6 ohm loads, 2 channels driven at 1 kHz with a maximum total harmonic distortion of 0.1%

Maximum Output Power (JEITA)		7 ch x 175 W at 6 ohms, 1 kHz, 1 ch driven

Dynamic Power		240 W (3 ohm, Front) 210 W (4 ohm, Front) 120 W (8 ohm, Front)

THD (Total Harmonic Distortion)		0.08% (Power Rated) 0.08% (1 kHz, 1 W)

Damping Factor		60 (Front, 1 kHz, 8ohm)

Input Sensitivity and Impedance		200 mV/ 47 kohm (LINE)

Output Level and Impedance		200 mV/ 470 ohm (REC OUT)

Frequency Response		5 Hz–100 kHz/ +1 dB-3 dB (Direct mode)

Tone Control		±10 dB, 50 Hz (BASS) ±10 dB, 20 kHz (TREBLE)

Signal to Noise Ratio		106 dB (LINE, IHF-A)

Speaker Impedance		4ohm–16ohm

Video Section

Input Sensitivity/Output

Level and Impedance		1 Vp-p /75ohm (Component and S-Video Y) 0.7 Vp-p /75ohm (Component Pb/Cb,Pr/Cr) 0.28 Vp-p /75? (S-Video C) 1 Vp-p /75ohm (Composite)

Component Video

Frequency Response		5 Hz – 50 MHz

Tuner Section

FM Tuning Frequency Range		87.5 MHz– 107.9 MHz

AM Tuning Frequency Range		530 kHz–1710 kHz

Digital Tuner		XM, Sirius

Preset Channel		40

General

Power Supply		AC 120 V, 60 Hz

Power Consumption		5.9A

Standby Power Consumption

Dimensions (W X H X D)		17-1/8" x 6-3/4" x 15-3/8" 435 x 172 x 391 mm

Weight		27.4 lbs. / 12.4 kg

Specifications and features subject to change without notice.